December 19th, 2008
| Wednesday, 10 December 2008 |
SAFETY
Safety is everyone’s concern and we take safety very seriously at HMC Instrumentation and Controls. We have established a health, safety, and environment (HS&E) program to address the issues and to be in compliance with the relevant state, and federal regulations for the geographical areas in which we operate.
HMC personnel and staff are trained in the safety policies, procedures and general safety practices as defined in the HSE Manual and each employee is responsible for ensuring their personal safety as well as counseling with fellow employees when they see unsafe acts.
It is our goal to be proactive in safety and to constantly improve safety and consistently strive for a safe work place for everyone at all times.
HMC Instrumentation & Controls
- Safety Quality Teamwork
|
Posted in Safety | No Comments »
December 19th, 2008
| Friday, 21 November 2008 |
|
HYDRAULIC / PNEUMATIC
INSTRUMENT TECHNICIANS
Our Instrument Technicians are professional craftsmen. Their expertise and knowledge comes with a focus on Safety, Quality and Production Schedule. With our next generation (Training) program we are working to supply the future with quality instrument technicians. Whether IT’S trouble shooting, repair work or new construction you can depend on HMC instrumentation & Controls to get the job done safely, on time and of the highest quality in the industry.
 ELECTRICAL / WIRING
ELECTRICIANS
Our electricians are licensed journeymen experienced with equipment relating to the upstream sector of the oil & gas industry. They are skilled troubleshooters who have solid understanding of Electrical Principles & Safety working on full range of voltages up to 13.2 KVAC.
Equipment includes: Transformers, motor starters and high voltage distribution systems. motor control centers and switchgears. New construction, troubleshooting and repairing electrical control systems, AC or DC drives, and PLC’s.
FABRICATION / WELDING
WELDERS
HMC Instrumentation & Controls provides welders and welding services for the oil AND gas industry. Whether IT’S stainless steel tubing applications, socket weld 6G or A36 steel plate, our welders are proven to get the job done right. All of our welders GO through the standard certification testing process and are qualified before they perform work for us or any of our clients. (GMAW, GTAW, FCAW, and/or SMAW.) HMC welders are certified accroding to our welding specification and all have PQR’s.
RESPONSE TIME We make every effort to respond quickly to your order for service and we can have your project staffed with Professional Industry Experienced SUPPORT in just a few hours in some cases.
Our customer service representatives are ready to assist you now.
Call 832-252-9280.
HMC INSTRUMENTATION & CONTROLS
– Safety Quality Teamwork
|
Posted in Personnel | No Comments »
January 27th, 2008
| Friday, 21 November 2008 |
SAFETY - QUALITY - TEAMWORK
OUR FIELD SERVICE HANDS UNDERSTAND THE IMPORTANCE OF WORKING TOGETHER AS A TEAM, TO ALWAYS PUT SAFTY FIRST AND CONSISTANTLY PROVIDE QUALITY SERVICE.
Whether your project is located onshore or OFFSHORE, domestic or international, with HMC on the project, you get a team of highly experienced industry professionals. We routinely man PROJECTS ranging from 3 to 20+ craftsmen per shift. (Electricians, Instrument Fitters, Welders, etc.) HMC also provides fully stocked gang boxes, tool trailers and other equipment.
Whether it’s trouble shooting, repair work or new construction, we get the JOB DONE RIGHT. We respond quickly to your order for service and supply QUALITY service personnel. Below is a list of services that represents our current scope of offering:
Inspectors
I&E Service Engineers
Instrument Technicians
Welders
Electricians
Mechanical Assemblers
Wiremen
Helpers
When you need qualified support, call the professionals.
HMC INSTRUMENTATION & CONTROLS
– Safety Quality Teamwork
We also provide certified crews for onshore/offshore hook-up, commissioning and completions.
Our customer service representatives are ready to assist you now.
Call 832-252-9280 today!
|
Posted in Services | No Comments »
March 26th, 2007
Contact Us
Corporate Office
HMC Instrumentation & Controls
2600 Gessner suite 267
Houston, Texas 77080
Phone: 832-252-9280
Fax: 713-462-1453
Manufacturing Facility
HMC Instrumentation & Controls
17545 Huffmeister Suite B
Cypress, Texas 77429
Phone: 281-213-8994
Fax: 281-256-9261
Posted in Contact Us | No Comments »
March 26th, 2007
| Friday, 21 November 2008 |
|
HMC Instrumentation & Controls specializes in the manufacturing of pneumatic, hydraulic and electronic instrumentation packages. Combining our knowledge base and experience with our project management and QUALITY system has enabled HMC to become a highly valued RESOURCE throughout the oil & gas industry.
TOPSIDE/PRODUCTION
Wellhead Controls
HMC Instrumentation & Controls manufactures wellhead control panels for single well or multi- well applications. These panels can be manufactured to be fully automated or with pneumatics and hydraulics only.
TUTU Panels
(Topside Umbilical Termination Unit) We can design to required pressures for various sub sea equipment using super duplex (2507) tubing or high pressure tubing up to 30,000 psi.
Other Equipment Includes: Master Control Panels, Chemical Injection, Fire Water Pump Panels, HPU’s and Flying Leads.
We are capable of designing any panel required to monitor and safely shut-in necessary equipment as per API RP 14C. We offer Turnkey manufacturing of production control equipment.
HMC at work on a Diverter Skid. www.hmcic.com
SUBSEA EQUIPMENT
We offer design and installation of control systems for
OTHER EQUIPMENT INCLUDES:
PLC Control Panels, Pipeline Metering Stations, Metering Gas Sites, Fire & Gas Systems, ESD Fire Loop Systems, Fire Pump Skids, Compressor Packages, and LUBRICATION systems for Natural Gas Compressors, unload systems on Compressors, and Industrial Gas Chromatograph Analyzer Units.
Onshore/Offshore Hook-up, Commissioning and Completions. We have certified crews ready to go that are qualified to get the job done right.
HMC INSTRUMENTATION & CONTROLS
– Safety Quality Teamwork
|
Posted in Services | No Comments »
March 26th, 2007
Posted in Portfolio | No Comments »
March 25th, 2007
| Friday, 21 November 2008 |
WELCOME
HMC Instrumentation & Controls is a Texas limited liability company that offers control system design and manufacturing of pneumatic, hydraulic and electronic instrumentation packages. We also offer industry experienced, highly trained and properly qualified service men to perform jobs which require a high level of technical expertise regarding controls. We make sure that you have the personnel qualified to get your project completed safely, on TIME and constructed of the highest quality craftsmanship.
Mission Statement
Our commitment to customer service is an important and distinguishing characteristic of our company and is the foundation from which we continue to grow. Our primary goal is establishing and sustaining long-term relationships with our customers by consistently providing quality products and services, safely and on time.
Our Infrastructure
Our manufacturing facility consist of cutting edge computer systems, manufacturing equipment and special tools which helps us design, manufacture and supply world class Automation and Control Systems. Whether it’s design, assembly, testing, or training, we have in-house modern facilities with everything we need to get the job done right.
Our Personnel
We are a team of skilled, dedicated professionals. From engineering & design to manufacturing, from field service to customer service we are here to make a positive impact on our industry. With our team of professionals working together, we have the capabilities of designing and building to your specifications and all the industry standards.
Our Quality
Quality is of paramount importance to us. Our focus on quality enables us to ensure that we offer the best quality products to our clients. All our quality control process satisfies national and international quality standards. We take pride in everything we do.
HMC INSTRUMENTATION & CONTROLS
– Safety Quality Teamwork
|
Posted in About Us | No Comments »
